Menu
Your Cart

OnLevel 3.0kN 6030 Surface System

  • Slimline, elegant design and low-maintenance
  • Drainage Holes
  • Suitable for glass thicknesses of 21.52mm to 31.52mm
  • For use where fixing at the edge may be unsuitable
  • Ideally suited for installations under floor level
  • For commercial and public use that require line load levels up to 3.0kN
Product code: K.ON.10.6030.002.11
Suitable for line loads up to 3kN in accordance with BS6180. Supplied in anodised aluminium, making it suitable for internal and external use. Sold in 2.5 metre lengths...
£390.30 Ex. VAT
Product code: K.ON.10.6030.390.11
Internal/External corner, finished in anodised aluminium. Suitable with the 6030 Top Mount Channel...
£148.75 Ex. VAT
Product code: K.ON.10.6030.490.11
Finished in an anodised aluminium. Easily fixed in place by means of a high bond double sided tape. Suitable for use with the 6030 Top Mount Channel...
£19.44 Ex. VAT
Product code: K.ON.90.0502.322.00
Suitable for use with the 3kN Systems and 1.5kN 3031 Side System. For use with a glass thickness of 21.52mm. The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular. It allows for installation and plumbing of the glass from ..
£53.54 Ex. VAT
Product code: K.ON.90.0502.326.00
Suitable for use with the 3kN Systems and 1.5kN 3031 Side System. For use with a glass thickness of 25.52mm. The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular. It allows for installation and plumbing of the glass from ..
£53.54 Ex. VAT
Product code: K.ON.90.0502.332.00
Suitable for use with the 3kN Systems and 1.5kN 3031 Side System. For use with a glass thickness of 31.52mm. The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular. It allows for installation and plumbing of the glass from ..
£53.54 Ex. VAT
Product code: K.ON.90.7001.640.31
40mm long connecting pins for the easy alignment and installation of the main profile. 2 required per joint...
£8.97 Ex. VAT
Product code: K.ON.90.0100.110.00
The Flex Fit tool allows you to easily fit the flex fit clamps to the profile. This tool allows you to adjust/plumb the glass easily from one side without marking or damaging the main profile...
£25.21 Ex. VAT
Product code: K.ON.90.0100.100.00
The combi tool is generally used for installing the fixed wedges once the glass is plumbed. It it is also used to smoothly install the rubber gaskets without the need to continually bend down making the installation faster and neater...
£109.76 Ex. VAT
Product code: K.ON.90.8030.035.11
To suit all the 3.0kN On Level channel systems. Supplied in plain anodised aluminium in 5 metre lengths. This cover just clips on to the channel and allows for a cladding 2mm thick...
£51.39 Ex. VAT
Product code: K.ON.90.7002.010.11
An optional mounting block that enables the profile to be adjusted by 5mm in either direction using the toothed section of the mounting block. 10 required per 2.5 metre length. Supplied in packs of 8...
£11.09 Ex. VAT
Product code: K.ON.90.8030.105.11
To suit all the 3.0kN On Level channel systems. Supplied in plain anodised aluminium in 5 metre lengths. This cover just clips on to the channel and allows for a cladding 10mm thick...
£44.98 Ex. VAT
Showing 1 to 12 of 20 (2 Pages)