Menu
Your Cart

Fixings, Tools & Accessories

Product code: KCV011
These are installed between the channel and the substrate to allow free flow of water to drain out of the system...
£1.92 Ex. VAT
Product code: K.ON.90.7001.440.31
Suitable for use with the 6500 & 6501 profiles 4mm in diameter and 40mm long connecting pins for the easy alignment and installation of the main profile. Supplied in packs of 8 2 required per joint...
£8.10 Ex. VAT
Product code: K.ON.90.7000.025.40
With this cover cap you seal the anchor hole in the glass profile. 17 pieces required per 2500mm. 25mm diameter...
£11.80 Ex. VAT
Product code: KCV008
Specially designed 10mm spanner used for tightening and adjusting the glass in the channel...
£5.12 Ex. VAT
Product code: K.ON.90.0502.010.00
Installation kit suitable for 2.5metres of channel and a glass thickness of 10mm. The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular. The flex fit system allows for installation and plumbing of the glass from one side only..
£38.63 Ex. VAT
Product code: KCV006
Stainless steel end caps cut to suit the surface mounted channel. An adhesive will be needed to hold the end cap in place...
£2.11 Ex. VAT
Product code: K.ON.90.0502.011.00
Installation kit suitable for 2.5metres of channel and a glass thickness of 10.76mm. The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular. The flex fit system allows for installation and plumbing of the glass from one side o..
£38.63 Ex. VAT
Product code: KCV006A
Stainless steel end caps cut to suit the surface mounted channel. For use where no base cladding has been used. Easily mounted to the end of the channel without the need for adhesives as it has two dowels for easy alignment and attachment...
£8.16 Ex. VAT
Product code: K.ON.90.0502.012.00
Installation kit suitable for 2.5metres of channel and a glass thickness of 12mm. The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular. The flex fit system allows for installation and plumbing of the glass from one side only..
£38.63 Ex. VAT
Product code: KCV010
These are installed between the channel and the substrate to allow free flow of water to drain out of the system...
£2.07 Ex. VAT
Product code: K.ON.90.0502.013.00
Installation kit suitable for 2.5metres of channel and a glass thickness of 12.76mm. The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular. The flex fit system allows for installation and plumbing of the glass from one side o..
£38.63 Ex. VAT
Showing 1 to 12 of 63 (6 Pages)